OptiBreaker Plus 6
- Up to 72,000 eggs/hour
- Up to 200 cases/hour
- Sanovo Egg
- Solutions
- Egg Processing
- SANOMIDI CIP
SANOMIDI CIP
25,000 litres/hour
Automatic cleaning and disinfection technology for food processing plants. Designed to save cleaning time, energy, water, and wastewater. Ideal for medium/large plants.
The SANOMIDI CIP is a complete cleaning plant suitable for the automatic cleaning of pipes, tanks, and other utilities where a maximum flow rate of 25.000 l/h is required using a double chemical solution based on Caustic and Acid. The system is skid-mounted providing maximum layout flexibility.
Based on best-practice hygienic design principles, the system is set to clean with a minimum speed of 1,5m/s. That ensures a turbulent flow and good mechanical impact of the CIP in the pipes. SANOMIDI is suitable for cleaning of pipes up to three inches in diameter and therefore fits the most common pipes used in liquid food processing. With SANOVO CIP systems you have full control over your cleaning operations.
- Minimize the cleaning time reducing the labor involved in the cleaning;
- Completely controlled by PLC for high efficiency and safe CIP cycle control;
- CIP Recipes available and editable by a user-friendly HMI
- Re-Use of detergents reducing the operational costs;
- Cross-contamination control between water and solutions ensured by the use of Mix-Proof valves;
- Ensure the correct concentration of the detergents used and flow rate of the cleaning;
- Completely skid mounted and tested before delivery
Specifications
- Type
- 1 Line
- 2 Lines
- Flow rate
- 1 Line: 25,000 L/h each line
- 2 Lines: 25,000 L/h each line
- Tank
- 1 Line: 3- Water, Acid, Alkaline
- 2 Lines: 3- Water, Acid, Alkaline
- Tank Capacity
- 1 Line: 1,000 L / 2,000 L
- 2 Lines: 1,000 L / 2,000 L
- Length
- 1 Line: 4,000 mm / 5,300 mm
- 2 Lines: 4,000 mm / 5,300 mm
- Width
- 1 Line: 2,050 mm
- 2 Lines: 2,050 mm
- Height
- 1 Line: 2,600 mm / 2,700 mm
- 2 Lines: 2,600 mm / 2,700 mm
- Disinfectant
- 1 Line: Possibility to add disinfectant injection in-line
- 2 Lines: Possibility to add disinfectant injection in-line
- Recovery water tank
- 1 Line: Possibility to add a water recovery tank where to collect the water of the last rinse and re-use it in the next one.
- 2 Lines: Possibility to add a water recovery tank where to collect the water of the last rinse and re-use it in the next one.
- Steam Consumption (2.5 ± 0.5 bar) - Max. Flowrate
- 1 Line: 600 kg/h
- 2 Lines: 1200 kg/h
- Installed Electrical Power Consumption (without optionals)
- 1 Line: 7.5 kW
- 2 Lines: 15.0 kW
- Drinking Water Consumption (2.5 ± 0.5 bar) - Max. Flowrate During Cleaning
- 1 Line: 25,000 L/h
- 2 Lines: 50,000 L/h
- Compressed Air Consumption (7 ± 1 bar)
- 1 Line: 2 Nm3/h
- 2 Lines: 2 Nm3/h
Get more insights!
Browse through the resources available for this equipment. If you are in need of additional information you are welcome to submit a request through the "Contact us" button on this product.
Lars Klitgaard Pedersen
Area Sales Manager
Tom März Sandholt
Chief Product & Business Management, DK
Brian Hansen
Product & Business Manager, DK
Aaron Smith
Regional Sales Manager
Bill Kelly
Regional Sales Manager
Jeffrey Goward
Regional Sales Manager
Michael Burke
Regional Sales & Project Manager
Pat Finn
Regional Sales Manager
Showing 8 of 32