ProductRecovery

Min. 100 litres/hour Max. 500 litres/hour

Skid-mounted system for maximizing yield and reducing loss in medium- and high-capacity egg processing plants.

During the start and end phases of your production, pipes are emptied and filled with water. In that process, a certain amount of your liquid egg product will be lost due to the mixing with water. SANOVO ProductRecovery uses membrane ultrafiltration technology to recover the egg-water mix deemed as waste, bringing it back to a desired dry matter so that it can be used again in the production cycle, increasing the yield of the process.
With Product Recovery, you have less waste treatment cost and increase the ROI of your liquid egg production. The system’s capacity depends on the dry matter of the inlet product.

The automatic dry matter control of the system automatically recognizes the condition of the inlet product.

SANOVO Automatic Dry Matter control for outlet product
Centrifugal Pump to feed the system with the watery product
Manual Filter for inlet product filtering
Tubular Heater for optimal preparation for the concentration membranes
Concentration Loop System for removing the water from the product
Tubular Cooler to reduce bacteria growth of the outlet product
Self-cleaning mode for minimal cleaning time
Operator Control System

Benefits

Hygienic design in stainless steel
Efficient cleaning by energy-efficient pivot system
Clip-on nozzles, easy to adjust and easy to clean
Low in- and outfeed height (when operated manually)
Flexible and customizable

Contact us for a detailed ROI calculation specifically for your business. Your machine will be tested before shipping and is produced with the SANOVO 'Plug&Go' concept for easy installation.

Specifications

Utility
- Consumption
Natural Water
- 2,000 l/h
- (Only during rinse)
Iced Water (+1°C)
- 300 l/h
- (The cooling power has been evaluated with feeding product at 6%w/w and recovered product at 23,5%w/w)
Installed Electric Power
- 26kW
- (7,7kW used during production*)
Compressed Air
- Max 50 NL/min
- (Max amount during chemical dosing)
*The main consumption is during the hot water generation for the heating of CIP solutions

Features

Connect the Water-Mixed product container

Connect the final product container

Start production of SANOVO ProductRecovery

The system runs automatically until the product has completely recovered.
Connecting the hose pipes

Start cleaning of SANOVO ProductRecovery

The system runs the cleaning automatically using the detergents.
The return on investment is less than 3 years for 1 ton of water/egg mixture per day.

The higher the number of eggs produced, the higher the amount of product lost in the water

When switching between different products, the drain and recovery phases must be emptied to prevent mixing. Otherwise, leftover product from one type can contaminate the next.

The configuration of the processing flow and the level of automation of the plant influence the quantity of mixing-product produced in an egg processing factory.