OptiBreaker Basic 2

Features

• Minimum amount of no-breaks and product loss

  In order to remove any stress on the egg, the breaker bar is tilted against the direction of movement thus synchronizing the speed of the breaker unit with the roller table. The breaker unit has been designed to make sure that no shells are lost in the product.

  
   

  

• 100% CIP Cleanable

  All internal parts of the SANOVO OptiBreaker are CIP cleaned. CIP cleaning is made possible by a hygienic design allowing only vertical or round parts. In this process the CIP liquids are collected and recycled, reducing manpower and water requirements to a minimum.

  

• Minimum Amount of Whole Egg

  The yolk is fragile and must be handled as gently as possible. In order to avoid cutting the yolk, the knife is held horizontally at the point of breaking the shell. Subsequently the entire breaker unit is tilted in order to allow optimal draining of the shell.

  The breaker unit and separation cup are two separate units. At the point of breaking and opening the shell, the breaker unit is inside the separation cup allowing the albumen and yolk to slide gently into the separation cup.

   

  

• Long and Forced Draining of Shells

  After breaking and opening the shell the entire breaking unit is tilted in order to drain the shell as much as possible. Due to the special design of the OptiBreaker, it is possible to reach an optimal draining time for each egg.

  The distance between the breaker bars and separation cups is gradually increased with the effect of forcing the albumen out of the shells to to maximize yield.

  

• Clean Albumen and Dry Yolk

  The OptiBreaker is equipped with a separation cup which is unique in its shape and material. At the point of receiving the product from the breaker unit, the entire separation cup is tilted. This allows the albumen and yolk to slide gently down into the separation cup ensuring that the fragile yolk remains intact.

  The separation cup is designed to allow the thicker part of the albumen to slip over the edge while the thinner part of the albumen will drain out through passages in the lower part of the cup. The OptiBreaker allows a staggering separation time of no less than 5.0 seconds.